Eurospec Sport
Products What's New Dealers Race Cars About Take a Tour Contact

Eurospec Connecting Rods

If there is a single part that is most critical to the health and well-being of a race engine, it is the connecting rod.  As this component is exposed to both extreme compressive forces and extreme tensile forces, the manufacturing process must be perfect. Material integrity, forging process, machining accuracy and all post machining treatments are critical to the part performing as intended.  We have been selling this line of connecting rods since 2004 and have experienced only positive results.  As our line expands you will see new models added on a regular basis, both in H beam and I beam configurations.  Additionally, we have added a new section for our non-standard and R&D connecting rods and there may be something of interest for you there.

 

Connecting Rods

 

I Beam Connecting Rods

Part Number Application Type Length Weight Pin Dia Bearing Bore Bolt Size Price
ECR 198 144 EAH 1.9A 4 Cyl 236mm Block - Early TDI Standard 144mm 583gr 26mm 50.60mm 3/8" $625.00
ECR 198 144 EAH 1.9B 4 Cyl 236mm Block - Late Tapered TDI Standard 144mm 568gr 26mm 50.60mm 3/8" $625.00

 

H Beam Connecting Rods

Part Number Application Type Length Weight Pin Dia Bearing Bore Bolt Size Price
ECR 198 144 EA 1.6 4 Cyl 220mm Block 1.6 Standard 144mm 600gr 20mm 49.00mm 3/8" $595.00
ECR 198 144 EA 1.6LW 4 Cyl 220mm Block 1.6 Lightweight 144mm 560gr 20mm 49.00mm 5/16" $595.00
ECR 198 144 EAH 4 Cyl 220mm Block Standard 144mm 600gr 20mm 50.60mm 3/8" $425.00
ECR 198 144 EA/5 5 Cyl 220mm Block Standard 144mm 600gr 20mm 50.60mm 3/8" $525.00
ECR 198 144 EAH/19 4 Cyl 220mm Block - Tapered Standard 144mm 555gr 19mm 50.60mm 3/8" $425.00
ECR 198 144 EALW 4 Cyl 220mm Block Lightweight 144mm 475gr 20mm 50.60mm 5/16" $495.00
ECR 198 150 EA 4 Cyl 236mm Block Standard 150mm 620gr 20mm 50.60mm 3/8"

$575.00

ECR 198 150 EA 1.6 4 Cyl 220mm Block Standard 150mm 600gr 19mm 49.00mm 3/8" $575.00
ECR 198 150 EALW 1.6 4 Cyl 220mm Block Lightweight 150mm 500gr 19mm 49.00mm 5/16" $575.00
ECR 198 150 EALW 4 Cyl 236mm Block Lightweight 150mm 553gr 19mm 49.00mm 5/16" $575.00
ECR 198 154 EA/6 V6 All Standard 154mm 540gr 21mm 56.80mm 5/16" $795.00
ECR 198 154 EA8/84 V8 3.6 & 4.2 Liter. Min bore 84.00mm* Standard 154mm 600gr 21mm 56.80mm 3/8" $950.00

ECR 198 154 EA/8

V8 3.6 & 4.2 Liter*

Lightweight 154mm 580gr 21mm 56.80mm 5/16" $950.00
ECR 198 154 96SJ V8 4.2 to 4.4 Stroker Standard 154mm 630gr 20mm 50.60mm 3/8" $1200.00
ECR 198 154 96SJNBT V8 4.2 to 4.4 Stroker w/o Bearing Tang Standard 154mm   20mm 50.60mm 3/8" $1200.00
ECR 198 159 EA 4 Cyl 236mm Block Standard 159mm 610gr 21mm 50.60mm 3/8" $475.00
ECR 198 159 EA/20 4 Cyl 236mm Block Standard 159mm 610gr 20mm 50.60mm 3/8" $475.00
ECR 198 159 EAH 4 Cyl 236mm Block Standard 159mm 586gr 21mm 50.60mm 3/8" $475.00
ECR 198 159 EALW 4 Cyl 236mm Block Lightweight 159mm 500gr 21mm 50.60mm 5/16" $475.00
ECR 198 159 EALW/20 4 Cyl 236mm Block Lightweight 159mm 500gr 20mm 50.60mm 5/16" $475.00
ECR 198 164 EAH VR6 all 2.8 & 3.2 Lightweight 164mm 568gr 20mm 56.80mm 5/16" $745.00
ECR 198 164 EA3.2 VR6 3.2. Min bore 84.00mm Standard 164mm 620gr 20mm 56.80mm 3/8" $745.00

* Must use VR6 connecting rod bearings (not included)

 

Non Standard and R&D Connecting Rods

Part Number Application Type Length Weight Pin Dia Bearing Bore Bolt Size Price
ECR 198 159 EAVR6 1.6 VR6 - 100mm Stroke Standard 159mm 587gr 20mm 49.00mm 3/8" $600.00
ECR 198 162 EA 3.8 VR6 - 3.2 to 3.8, 96mm Stroke Standard 162mm 580gr 20mm 50.60mm 5/16" $600.00